Do you remember this project?
We took the scallops and added them to the front of this plate rack.
you You can see the entire project here.
// Trim the scallops //
Scallops come in a pack of 24 for under $12. After we finished the project, there were a few pieces of scallop trim left over.
you Scalloped trim can be found here.
I shoved them into a drawer and promptly forgot all about them.
The other day, I was looking for something and ran across them in the drawer, and I went downstairs, an idea came to my mind.
should i
can i
Use it to make this.
Remember this table that I just showed Carnation fluffing in the post?
When she went back in, she came home with Whitney.
We understand Many years ago at Hobby Lobby.
Don’t think it needs a scallop?
I wasn’t sure if it would work, so I pitched the idea to the nicest carpenter on earth and he assured me that it was not only possible, it would be easy to do.
Here’s a step-by-step guide to adding scallops to the table.
// Trim the scallops //
How to Add Scallops to the Table (Step by Step Tutorial)
Supplies:
the stain
Small quarter round
nails
1. Brine the scallops
Scallops come unfinished so you can stain or paint them to match the furniture piece.
You want to make sure you do this before you add them to the front.
We played around with different colors of stain before we found one that matched.
We stained the scallops with minwax.
2. Cut quarter rounds to fit
A 1/4 piece is perfect for this project.
My original idea was to just glue the scallop pieces to the back of the sides.
But it didn’t work.
We had a challenge with the table because the brackets for the legs prevented us from just adding wood (and the drawer front as well).
So my husband suggested quarter round. It has rounded edges and two sides.
One side will attach to the side of the table and one side will attach to the scallop.
Cut a quarter round to fit the space between the table legs.
(Total aside: I hope this makes sense because I can be a little instruction-challenged sometimes.)
// Trim the scallops //
3. Glue the quarter round in place
Positioning the quarter round flush is easier if you glue it in place.
Use it Basic wood glue (You can also tape the piece to help keep it in place).
Let dry.
After the glue dries, nail it in place.
// Trim the scallops //
4. Glue the scallop into a quarter round
now?
Cut the scallop to fit the space between the table legs.
All you have to do is use wood glue to glue the scallops to the quarter rounds.
No nail holes will be visible.
Repeat the process around the sides and front of the table. On the front, we had a few gaps because we needed three scallop pieces for the front of the table. You can fill it with wood putty and sand and stain.
I didn’t.
I just left them.
Each piece needs a little “character”.
That’s it. The table is officially scalloped.
And now?
This table looks like….
// A patterned rug //
// A patterned rug //
This.
I can’t believe how the scallop table has changed.
It’s just a small thing, but it completely elevates the piece.
It’s the little things that make a big difference.
// A patterned rug //
And if you have a few scallops left over?
Here are some other ideas I thought of that could use some scallops around the house (It will work if you don’t have a table):
- The front of the hutch
- Picture frames (Oh-good idea Kerryanne-I need to make us a scalloped picture frame)
- Next to the wooden shelf
- Around a wooden box
- Open kitchen shelves
- around a wooden tray
- Around the top of the side table
- around the edge of the jewelry box
- And of course—a plate rack like mine
You know what I just realized?
I love to eat scallops.
And decorate with them too. 🙂
Disclosure: This post uses affiliate links.
Want to learn how to decorate your home for free?
Click here to get my five best secrets.



















